EMC test equipment, from one source.
Emission and immunity test systems, instruments and components for EMC laboratories and manufacturers worldwide: designed, sourced and supplied by TESTUPS, with installation, calibration planning and training.
EMC test systems
Complete set-ups for emissions, immunity and transient testing: instruments, transducers, software and integration.
Radiated emissions
Measure the unintentional radio energy a product radiates, from 30 MHz up to 40 GHz.
Conducted emissions
Measure the noise a product pushes back into its power, signal and telecom cables, typically 150 kHz to 30 MHz.
Radiated immunity
Expose a product to a calibrated electromagnetic field and confirm it keeps working: 80 MHz to 6 GHz, from 1 V/m to 200 V/m and beyond.
Conducted immunity
Inject RF disturbances into cables and ports, typically 150 kHz to 80 MHz (up to 230 MHz where the test plan requires it), and check the product still performs.
ESD, EFT and surge
Real-world transients in one place: electrostatic discharge, switching bursts, lightning-induced surges and mains disturbances.
Automotive EMC
Component- and vehicle-level EMC: emissions, immunity and supply-line transients for automotive electronics and electric vehicles.
EMC components
Antennas, LISNs, filters, absorbers, turntables and masts: the parts that decide measurement quality.
Antennas
Measurement and field-generating antennas from the kHz range to microwave frequencies.
LISNs
A LISN gives the product a defined supply impedance and couples its conducted noise to the receiver, so measurements are repeatable.
EMI filters
Every cable into a shielded room is a possible leak. Filters let power and signals in and keep RF noise out.
RF absorbers
The lining that turns a shielded room into an anechoic chamber.
Turntables
Rotate the product so the receiver sees its strongest emission.
Antenna masts
Scan the antenna height and switch polarisation automatically, as radiated emission methods require.
Test cells and enclosures
TEM and GTEM cells, shielded enclosures and chambers for radiated testing at every scale.
GTEM and TEM cells
A controlled field in a box, for modules, boards and small devices.
Shielded rooms and tents
Keep outside RF out of the measurement, from a portable tent to a full room.
Anechoic chambers
The room for radiated tests: a shielded shell with an absorber lining, sized for your test distance and products.
How we work
- Specification: standards, frequency range, test levels and the products you test
- Selection and supply of instruments, transducers and software as one working system
- Installation, integration and training on site
- Calibration planning so the measurement chain stays traceable
See a complete EMC lab in 3D
Need EMC test equipment?
Tell us the standards, frequency range and test levels you need. TESTUPS designs, sources and supplies the complete set-up, with installation, calibration planning and training.